Apple Xserve Intel (Late 2006) DIY Procedure for Expansion Card Riser - Manual (Page 6)

Xserve (Late 2006) PCI Expansion Card Riser Replacement Instructions 
Closing the Xserve
Replace and secure the cover.
Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve
in the rack.
If the server case was locked, use the enclosure key to lock the security lock on the front
panel.
 Apple Computer, Inc.
© 2006 Apple Computer, Inc. All rights reserved.
Under the copyright laws, this document may not be copied, in whole or in part, without the
written consent of Apple.
Every effort has been made to ensure that the information in this document is accurate. Apple is
not responsible for printing or clerical errors.
Apple
1 Infinite Loop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
Apple, the Apple logo, Mac, Macintosh, and Xserve are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
1.
2.
3.