Step 4: turn personal file sharing on, Step 5: mount all of the media storage volumes – Apple Shake (Qmaster 1.2) Distributed Rendering (10.3) User Manual
Page 4
4
Step 2:
Make sure each computer has a volume dedicated to media
Give each computer a second volume, such as a FireWire drive, that is used for media.
Each computer will use this volume for all source and destination files associated with
Shake scripts, including the Shake scripts themselves.
Note:
Each media volume should have a different name.
Step 3:
Turn off the UNC (Universal Naming Convention) setting for Shake
In order to make sharing and volume mounting work smoothly in this setup, you
need to turn the Shake UNC setting off on each computer. The UNC setting uses the
entire file pathname, with the network address, in a convention that starts with
//ComputerName/DriveName/path.
You don’t want Shake to use this filenaming
convention because it conflicts with the file sharing and volume mounting used in
this setup.
In the three steps below, you make this change in a Shake
startup
.h file. As described
in the Shake documentation, the
startup
.h files, located in the
startup
directory, are
used to customize Shake settings (similar to setting preferences).
To turn off the UNC setting, do the following on
each
of the computers:
1
Log in as the user who will use Shake on the computer.
2
Double-click the Terminal icon in /Utilities/Applications to open a Terminal window.
3
Enter these two command lines in the Terminal window, pressing Return after each
command line:
mkdir -p ~/nreal/include/startup/
echo 'script.uncFileNames = 0;' > ~/nreal/include/startup/UNC_off.h
Step 4:
Turn Personal File Sharing on
On each computer, open System Preferences, click Sharing, and turn on Personal File
Sharing. This allows the computers to share the media volumes.
Step 5:
Mount all of the media storage volumes
On each computer, log in as the administrator. (The first user account you create when
you set up Mac OS X is an administrator account.) Then, on each computer in the
group, use the Connect to Server command in the Finder
’
s Go menu to mount each
media volume.
90180SET Page 4 Thursday, April 15, 2004 3:32 PM