Apple Macintosh Performa 6400 Series User Manual
Page 117
5
Insert the
Macintosh Performa CD: Guided Tour that came with your computer into the
CD-ROM drive.
The Macintosh Performa CD: Guided Tour reinstalls the software programs that
you may have seen before when you first turned on your computer. (You
should reinstall these in case you need to refer to them again.)
6
Hold down the C key on your keyboard while you choose Restart from the Special menu.
Continue to hold down the C key until you see the “Welcome to Macintosh”
message.
7
In the Launcher that appears on your screen, click the Restore Guided Tour button.
8
When the Restoring Performa Software screen appears, click the Continue button or
press the Return key on your keyboard.
9
When you see a message that the software was restored successfully, click the Restart
button or press the Return key on your keyboard.
In a few moments, the Macintosh desktop with the Launcher appears on
screen (just as in step 4). You have successfully restored Apple software to
your hard disk.
If your computer starts up properly but a program is damaged or missing, you
may want to run the Restore All Software program from the Macintosh
Performa CD: Performa Software. See the instructions in the next section,
“Reinstalling All Your Original Software.”
117
Reinstalling Your Computer’s Software