Mackie baby hui, Set up, Assignment overview – Apple Logic Pro 7.2 User Manual
Page 147: Channel strips, Chapter 10
10
147
10
Mackie Baby HUI
Set Up
Please
make
sure
that
your
Baby
HUI
unit(s)
is/are
connected
bi-directionally
with
the
computer.
You must manually scan for Mackie Baby HUI units:
1
Choose Logic > Preferences > Control Surfaces > Setup.
2
Choose New > Install in the Setup window’s local menu.
3
Select Baby HUI in the Install window.
4
Click the Scan button.
Assignment Overview
A right-aligned
SHIFT
below a button description indicates that the control has an
alternate meaning/use while holding down this modifier.
Channel Strips
Control
Assignment
Rotary encoder
Adjusts parameter selected in the Encoder Assignment section.
Rotary
encoder
push
button
Selects track.
SHIFT Enables/Disables Record Ready.
Signal indicator
Illuminates
when
a
signal
is
present
in
the
channel.
It
also
indicates
channel
selection.
SOLO
Enables/Disables Solo.
MUTE
Enables/Disables Mute.
Fader
Adjusts volume.