Apple AirPort Time Capsule 802.11n (4th Generation) - Manual (Page 28)

28 Chapter 3 TipsandTroubleshooting
IfYourTimeCapsuleIsn’tResponding
Try unplugging it and plugging it back in.
If your Time Capsule stops responding completely, you may need to reset it to the
factory default settings.
Important: Resetting your Time Capsule to factory default settings erases all of the
current settings and resets them to the settings that came with your Time Capsule.
To return your Time Capsule to the factory settings:
m Use something pointed (such as a ballpoint pen) to press down and hold the reset
button until the status light flashes quickly (about 5 seconds).
Your Time Capsule resets with the following settings:
 Your Time Capsule receives its IP address using DHCP.
 The network name is reset to Apple Network XXXXXX (where XXXXXX is replaced
with the last six digits of the AirPort ID).
 The Time Capsule password is reset to public.
If your Time Capsule still isn’t responding, try the following:
1 Unplug your Time Capsule.
2 Use something pointed to press and hold down the reset button while you plug in
your Time Capsule.