How mainstage passes through midi messages, Export layouts – Apple MainStage 3 User Manual
Page 118
Chapter 7
Work in Layout mode
118
How MainStage passes through MIDI messages
Some MIDI messages sent by your keyboard controller (or other MIDI device) are “passed
through” to any channel strips in the MainStage concert that are mapped to the same controller
(or device). Whether or not MIDI messages are passed through depends on the following
conditions:
•
If there is no screen control in your layout assigned to receive the message type sent by the
controller, the messages are passed through.
•
If a screen control for that MIDI message type exists, and the MIDI Thru parameter for the
screen control is set to Automatic or to the input device, the messages are passed through.
This is the default for screen controls set to receive volume, pan, expression, sustain,
modulation, pitch bend, and aftertouch messages.
•
If a screen control for that MIDI message type exists, and the MIDI Thru parameter for the
screen control is set to “Do not pass through,” the data is not passed through. This is the
default for most other screen controls.
The reason for these exceptions is so that when you add a screen control for a modulation wheel
or a sustain pedal, for example, it “automatically” responds to the appropriate MIDI message type,
without your having to configure it further. If you want to have the screen control respond to a
different type of MIDI message, you can choose another MIDI message type from the Number
pop-up menu in the Screen Control Inspector.
Incoming MIDI messages that are passed through are passed to any channel strips mapped to
the same device sending those messages (that is, to the keyboard controller you are using to
“play” those channel strips). If there is no matching device, the MIDI messages are sent to all
channel strips.
You can also filter incoming MIDI messages for individual channel strips. For information on
filtering MIDI messages, see
on page 53.
Export layouts
You can export a layout so that you can save it independently from the concert and import it
into other concerts.
Export a layout
1
Choose File > Export Layout (or press Command-Shift-Control-S).
2
In the Save As dialog, type a name for the layout.
3
Browse to the location where you want to save the layout and select it (or use the default
location).
4
Click Save.