Brother FAX-1840CN - Manual (Page 101)

7 - 2 TAD (TELEPHONE ANSWERING DEVICE) (FAX-1940CN ONLY)
Recording TAD Outgoing Message
Recording the TAD Outgoing Message ( TAD Message ) is the first
step you need to follow before you can turn on the TAD. Make sure
your OGM is less than 20 seconds long.
1
Press Menu/Set , 2 , 7 , 1 .
The LCD prompts you to choose an
OGM.
2
Press ▲ or ▼ to select
TAD Message (not F/T Message ).
Press Menu/Set .
3
Press ▲ or ▼ to select Record MSG .
Press Menu/Set .
4
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal.
5
Replace the handset.
The TAD will play your OGM.
6
Press Stop/Exit .
This is the only setting you can select if you want to turn on
the TAD.
1.OGM
TAD Message