Apple GarageBand Tutorial: Lesson 2 - Manual (Page 7)

Changing the Input Channel and Input Format
When you create a Real Instrument track, you set the input format to either mono or stereo, and
set the input channel (for mono input) or pair of channels (for stereo input). You can change
these settings in the Track Info window.
To change the input format:
1 Select the track, then click the Track Info button to open the Track Info window.
2 Choose an input channel, or pair of channels, from the Input pop-up menu.
To change the input channel:
m Click the Mono format button for mono (single) input, or click the Stereo format button for stereo
input (left and right channels).
Editing and Arranging Real Instrument Regions
You can arrange Real Instrument regions in the timeline in all the ways described in Lesson 1 for
loop regions, with one exception: you can’t transpose a region created from a Real Instrument
recording.
For information about editing regions, see “Arranging Regions in the Timeline” in Lesson 1.
© 2004 Apple Computer, Inc. All rights reserved.
Apple and the Apple logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. GarageBand is a trademark of
Apple Computer, Inc. The owner or authorized user of a valid copy of the GarageBand software may reproduce this publication for the
purpose of learning or teaching to use the software, excluding commercial or paid-for purposes.022-1386.