Apple iMac G3 (Original) User Manual
Page 18
Advertising
18
How do I add memory and an AirPort Card?
For detailed instructions, refer to Mac Help (see page 20).
Before installing:
m
shut down the computer
m
unplug all cables, except the power cord
m
place the computer face down on a soft cloth
1
Open the access door using
a coin to turn the latch.
2
Touch the metal shield inside
the recessed latch area. Then
unplug the power cord.
.
Touch this metal before you touch
any parts inside the computer. Don’t
walk around the room until you’ve
finished installing memory or an
AirPort Card.
3
To install memory, insert
a memory module into one of
the two lower slots.
.
Be sure to align the notches on the
module with the small notches inside
the slot.
4-0938.UMpos 9/28/99 1:51 PM Page 18
Advertising