BeefEater Discovery Series - Manual (Page 12)

12
Service And Maintenance
Each use Every 6
months By authorised service
agent every 2 years
Check all hoses for cracks and leaks
Check that all gas connections are tight
Clean entire barbecue thoroughly
Check and tighten all bolts on barbecue and trolley
Clean and inspect Vaporizers
Clean and inspect barbecue burners
Clean and inspect gas injectors and control valves
Check working of ignition system
Problem Cause Check
Barbecue will not light Ignition system not working Check to see visible spark at starter probe - if no
spark is present when control knob is turned then
the unit may need to be serviced or replaced.
Contact your BeefEater dealer.
Check that there is a visible flame coming from
the pilot ignition tube.
Check that the pilot ignition tube is not blocked by
spider webs or insect nests.
Turning on gas control too
quickly Allow at least 5 seconds for gas to flow through
burner before ignition
No gas flow Check that valve on gas cylinder is turned on.
Check that burner ports are free of obstructions
Check that all gas injectors are clean and free of
obstructions
Burners not assembled
correctly Check that burners are correctly positioned in the
barbecue frame.
Burner ports or throat
blocked Check that the burner ports are not blocked by
spider webs or insect nests. Clean out as required
Barbecue lights but goes
out soon after starting Fuel supply turned off Turn on gas valve at cylinder
Gas cylinder low or empty Refill cylinder with gas
Kink in gas hose Check that the gas line is not kinked or twisted
Wind or breeze affecting
operation Ensure that the appliance is located out of the
way of wind
Burners will not cross
light from one to the
other Check that cross light channel is in place
Check that burner ports are free of obstructions.
Low flame level or low
heat output Check you are running on correct gas
Check gas injector size is correct
Trouble Shooting Guide
This appliance should be checked and serviced by an authorised service person every 2 years to ensure the
appliance remains in a safe operating condition. (These services are not covered by warranty). Replacement
parts are available from your authorised BeefEater Dealer