Apple AppleShare IP 6.1 User Manual
Page 16
16
Chapter 1
m you have already set up your TCP/IP control panel. If you will be running any AppleShare
IP services with a modem (or “dial-up”) connection to the Internet, skip ahead to “Setting
Up TCP/IP and Remote Access (for Modem Access Only)” on page 17. If you won’t be
using a modem connection, skip ahead to “Setting Up Energy Saver” on page 23.
To set up the TCP/IP control panel, follow these steps:
1
Open the TCP/IP control panel.
If TCP/IP is inactive, the following message appears.
2
Click Yes.
3
Choose User Mode from the Edit menu.
4
In the User Mode window, click Basic, if it’s not already chosen. Then click OK.
The TCP/IP window shows the basic TCP/IP options.
5
Choose the network connection you are using to connect over TCP/IP from the “Connect via”
pop-up menu.
This setting determines the port that your server will use to connect to your TCP/IP network.
6
Choose Manually from the Configure pop-up menu.