Apple AirPort Extreme 802.11n (1st Generation) - Manual (Page 21)

Chapter 3 Setting Up AirPort Extreme 21
Creating a New Wireless Network
You can use the setup assistant in AirPort Utility to create a new wireless network. The
setup assistant guides you through the steps necessary to name your network, protect
your network with a password, and set other options.
If you plan to share a USB printer or USB hard disk on your network:
1 Connect the printer or hard disk to the AirPort Extreme USB port (d).
2 Open AirPort Utility, located in Utilities folder in the Applications folder on a Macintosh,
or in Start > All Programs > AirPort on a computer using Windows XP.
3 Follow the onscreen instructions to create a new network.
Configuring and Sharing Internet Access
If you plan to share your Internet connection with wireless-enabled computers on your
network or computers connected to the Ethernet ports, you need to set up your
AirPort Extreme as an AirPort Base Station. Once it is set up, computers access the
Internet via the AirPort network. The base station connects to the Internet and
transmits information to the computers over the AirPort network.
Before you use the AirPort Utility to set up your base station, connect your DSL or cable
modem to the AirPort Extreme Ethernet WAN port (<). If you are using an existing
Ethernet network with Internet access to connect to the Internet, you can connect the
AirPort Extreme to the Ethernet network instead.