Eq knobset, Sends knobset, Send configuration knobset – Apple Logic Express 7.2 User Manual

Page 118: Sends, Knobset

Advertising
background image

118

Chapter 4

EuCon Support of Euphonix MC and System 5-MC

EQ Knobset

This knobset allows you to edit the first EQ plug-in (Channel EQ or Linear Phase EQ).
There are two pages, with each band featuring two knobs. Page 1 shows the
parameters of the first, second, 7th, and 8th EQ bands. Page 2 shows the parameters of
EQ bands 3 to 6. When no Linear Phase or Channel EQ is present on the selected track,
pressing the last Soft Key in the second row (labeled AddChEQ) inserts a Channel EQ.

For each band:
Â

The upper knob controls either Frequency or Q. You can switch between Frequency
or Q with the Select key for the Knobset. Pressing the knob top sets the controlled
parameter to its default value.

Â

The lower knob controls Gain (or Slope). Again, pressing the knob top sets the
controlled parameter to its default value.

Â

The lower knob‘s On key switches the bypass state of the band. When the band is
bypassed, the On key is unlit. When the band is active, the On key is illuminated.

To return to the top-level knobset:

m

Press the Back key.

Sends Knobset

The Sends knobset displays the current track send options.
Â

The Soft Key shows the send destination.

Â

The knob controls send level.

Â

The Select key switches between pre fader (off—unlit) and post fader (on—lit)
modes.

Â

The On key switches the bypass state of the send.

Â

Pressing both Page keys simultaneously enters Send Configuration mode (see the
following section).

Â

Pressing the Back key returns to the top-level knobset

Send Configuration Knobset

In Send Configuration mode, a list of the first eight Send slots is displayed.

When you touch the knob, the Soft Key shows the send level (provided the send slot is
already assigned to a bus).

To change a send destination:

1

Select the desired Send slot by pressing the respective Soft Key or knob top.

The first eight Send destinations are displayed. You can use the right Page key of the
left Page key set to display ensuing Send destinations.

2

Choose the desired destination by pressing the respective Soft Key or knob top.

Advertising