Apple Color StyleWriter 6500 - Manual (Page 13)

3 Open the printer’s cover and remove the packing material from the inside of the printer.
There are three white plastic pieces inserted inside of the printer. Remove the
two large pieces that are across the top of the carriage. Then follow the next
step to remove the third, smaller piece.
4 Slide the carrier to the right and remove the white plastic carrier restraint.
Save the carton and the packing material in case you ever need to ship the
printer.
5 Close the printer’s cover.
6 Place the printer in your work area.
Choose a location near your computer that has an electrical outlet and good
ventilation, is out of direct sunlight, never gets damp or very hot or very cold,
and is away from devices that could cause electromagnetic interference, such
as stereo speakers or cordless telephone transmitters. Do not place the printer
on a slanted surface. See Appendix A, “Technical Information,” for specific
information about the physical requirements of your printer.
Then, remove the
packing material.
First, slide the
carrier to the right.
4 Chapter 1