MBW MK8 121 - Manual (Page 11)

- 8 -
Replacing The Battery
WARNING
Handle the battery with particular care since it
contains acid
1. Remove the battery cover by unhooking the two
hooks.
2. Remove the negative cable first.
3. Remove the battery and replace it with one with the
same characteristics (45 Ah)
Replacing The Floats
CAUTION
Be careful when installing the floats: one rotor
turns clockwise and the other counterclockwise,
therefore you need to check that the various com-
ponents have been properly arranged.
1. Before mounting the floats, check that the blades are
clean. The blades must be placed in horizontal
position using the pitch control.
2. Slightly lift the float machine off the ground (about 4”).
3. Mount the floats on the blades checking the correct
direction of rotation.
4. When the floats have been mounted, reposition the
float machine on the ground.