MBW VS77M - Manual (Page 8)

- 5 -
M
AINTENANCE
WARNING
Always exercise the stopping procedure before
servicing or lubricating the unit.
After servicing the unit, replace and fasten all
guards, shields, and covers to their original
positions before resuming operation.
CAUTION
Always verify fluid levels and check for leaks after
changing fluids.
Do not drain oil onto ground, into open streams,
or down sewage drains.
Maintenance Schedule
1. Check all hardware after the first 5 hours of use, then follow the maintenance schedule.
Fluid Levels
1. MBW #19692---- 1 quart (32 oz)
Tamper Oil
The MBW tamper requires an inline oil supply to function.
Use of the tamper without an inline oiler will damage the
internal surfaces. A suitable oiler can be purchased through
MBW, Part #12248.
In event the tamper will be stored, pour several ounces of oil
into the line to prevent corrosion.
Vibration Suppressor Oil
The MBW Vibration suppressor is an Oil-free device,
However use of an inline oiler will lengthen the tool’s life
span.
SYSTEM MAINTENANCE DAILY
EVERY 50
HOURS
EVERY 250
HOURS
YEARLY
Tamper Check oil level X
Check for oil leaks X
Hardware Check and tighten as needed
1 X X
SYSTEM FLUID VOLUME RECOMMENDED OIL
TAMPER Use external oiler 15W50 Air Tool Oil
1
Engine Refer to engine operator/owner manual