CompuSTAR RF-P2W901-SS (Remote 2W901R-SS) User Manual

Page 9

Advertising

Remote LCD (liquid crystal display) Diagram and icons

Your remote pager will indicate the status of your vehicle while in range. The unique LCD design will visually display such icons as lock/unlock status,

remote start confirmation and remaining run-time, impact/shock notification, battery voltage, temperature display and much more.

Remote LCD (liquid crystal display) Diagram and icons

7caacb=Wcbg!

Lock/Arm – Unlock/Disarm
This icon indicates whether the system is locked/armed or unlocked/disarmed. While armed, the system will monitor the doors, trunk,
hood, shock sensor, and aux inputs. If any of these inputs are triggered while the system is armed, the alarm will be triggered.

Trunk Release
This icon will be displayed when the trunk release function has been activated. By default, the system will be disarmed and the doors will
unlock before the trunk is released.

Signal Strength
This icon is displayed if the last communication to the vehicle was successful.
Valet Mode
This icon will be displayed while you are in Valet mode. While in valet mode, the system will not perform any functions other than lock
and unlock. The alarm will not arm or disarm while locking or unlocking. If any other function is attempted, “Sleep” will be displayed.
The system will not monitor the alarm triggers while in Valet mode.
Battery Indicator
This icon displays the remaining battery life left in 33% increments.

Clock
Displays current time, remote start runtime, turbo mode time remaining, inside temperature of the vehicle, battery voltage of the vehicle,
battery voltage of the remote and failure of signal transfer.

Shock
Sensors off

Battery

Start

Avail

Turbo

Lock
Status

Aux

Temperature

Alarm

Clock

Ign. Con
Door Locks

Passive

2nd Car

Voltage

Timer start

Valet

Warn

Siren

Vibration

Signal
Strength

Hood

Car Call

Arm

Impact

Door

Parking
Lights

Trunk