Rvf1215st – Ruvati RVF1215ST User Manual

Page 7

background image





Printed in USA


Page 6


Figure 7

Figure 8

Figure 9

9. Then screw the remaining female

ends of the supply hoses to the

corresponding hot and cold water

supply valves using an adjustable

wrench or pliers (Figure 7).

11. Insert rubber gasket B into the

end of the top end of the faucet.

Then attach the faucet head by

screwing until tight (Figure 9). Test

the faucet by turning it on and off.

Make sure there is good water flow

and no leaks. Inspect the faucet

above and below the countertop to

make sure there are no leaks. If there

is a leak, turn the water supply off

and contact Ruvati Support.

10. Turn water supply on (Figure 8).

Turn the faucet on to let water run

through it and flush out any dirt /

debris. Turn faucet off now.