Ruvati RVF5110ST - Manual (Page 6)

®
RVF5110ST
www.ruvati.com Printed in USA
1-855-4-RUVATI
Page 5
®
Figure 5
Figure 4
Figure 6
7. Attach the hot and cold water supply
hoses to the handles by screwing the
end of each hose to the hot/cold water
supply pipes. Use an adjustable wrench
or a pair of groove point pliers to make
sure each end is tight (Figure 6).
5. Attach the tee to supply hose pipe
of the faucet body by inserting the tee
onto the end of the supply hose pipe
until it will go up no further (Figure 4).
6. Now, connect the cold water supply
hose to the end of the cold water supply
hose pipe by inserting the supply hose
onto the end of the hose pipe until it
will go up no further. Do the same for
the hot water hose (Figure 5).