Bench Dog Tools RT400 User Manual
Contents of box requirements, Owner's manual
Contents of Box
Requirements
1
router top
1
phenolic ProPlate
1
32" miter track
Hardware
12
7 x 40mm insert plate leveling screws
2
1/4-20 x 1" phil. flat head mach. screws
14
1/4-28 x 1/2" set screws
4
1/4-20 x 2" phil. flat head mach. screws
4
1/4-20 x 2" round head bolts
8
1/4-20 cross dowels
1
4mm hex wrench
2
trim strips
4
#6 x 1/2" screws
4mm hex wrench (supplied)
1/8" hex wrench (supplied)
screwdriver and power drill
drill bit (sized to your router mounting screws)
countersink 82 degree
drill press (recommended)
Assembly
Mounting Router
Congratulations and thank you for buying our
ProTop Standard router top! If you have any
questions, please give us a call. This manual will
assist you during the assembly of your router table.
However, this manual is not intended as an
instructional manual for router table usage. Please
consult the widely available books, magazines, and
classes on router table techniques.
Thank you for choosing Bench Dog!
2004 Bench Dog, Inc.
Read and understand the entire contents
of this manual before attempting assembly
or operation of this tool! Inspect contents
for shipping damage and shortages. Report
problems directly to Bench Dog, Inc.
Be sure to check out our web site for all the
latest and greatest accessories and tools.
www.benchdog.com
1-800-786-8902
QUESTIONS?
Stock No. 40-032
612.782.8205 main
612.788.2518 fax
800.786.8902 toll free
[email protected]
benchdog.com
Bench Dog, Inc.
3310 5th St. NE
Minneapolis, MN 55418
82-0009-06 0904
Keep this manual handy for
quick reference
Owner's Manual
(fomerly RT400)
(29126)
Note: Rockler may not carry all products and/or sizes listed in this vendor's publication
RTD10000534AA