Lukas SHR 20 - Manual (Page 18)

18
Servicing may only be carried out by the manufacturer or personnel trained by the
manufacturer and by authorised LUKAS dealers.
Only LUKAS spare parts may be used to replace all components (see spare parts list) since
special tools, assembly advice, safety aspects, inspections might have to complied with (see
also chapter “Maintenance and Service”).
During assembly, ensure the complete cleanliness of all components, since dirt can
damage the rescue equipment!
9. Repairs
WARNING / CAUTION!
Protective clothes must be worn when repairs are being carried out, since parts
of the units can also be pressurised in an idle state.
REMARK:
Always register your tool on the LUKAS Hydraulik GmbH internet site. This is the
only way to guarantee extended warranty cover.
REMARK:
Before you use couplings from a different company, you must contact LUKAS or
an authorised dealer.
9.1 General information
CAUTION!
Because LUKAS of rescue equipment are appropriate for highest achievements,
only components may be exchanged, which are specifi ed in the spare parts list
of the appropriate equipment.
Further components of the equipment may only be exchanged, when:
- you have participated on a appropriate LUKAS service training.
- you have the explicit permission of the LUKAS Service department (After inquiry,
examination for the distribution of permission. Examination in each individual
case necessarily!)