Lukas SHR 20 - Manual (Page 5)

5
2. Product safety
Wear protective clothing, safety
helmet with visor, protective
gloves
Inspect the equipment before
and after use for visible defects
or damage.
The responsible department
is to be informed immediately
of any changes (including to
the operating behavior). If
necessary, the equipment is
to be deactivated immediately
and secured!
Inspect all cables, hoses and
screwed connections for leaks
and externally visible damage.
Repair them immediately!
Squirting hydraulic liquids can
result in injuries and fi res.
In the event of malfunctions,
immediately deactivate the
equipment and secure it. The
malfunction is to be repaired
immediately.
Do not carry out any changes
(additions or conversions)
to the equipment without
obtaining the prior approval of
LUKAS.
LUKAS products are developed and manufactured in order to guarantee the best performance
and quality when used properly.
Operator safety is the most important aspect of the product design.
Moreover, the operating instructions are intended to help the safe use of LUKAS products.
The generally applicable, legal and other binding regulations pertaining to the prevention of
accidents and protection of the environment apply and are to be implemented in addition to
the operating instructions.
The equipment may only be operated by persons with appropriate training in the safety
aspects of such equipment – otherwise, there is a danger of injury occurring.
We would like to point out to all users that they should read carefully the operating instructions
and the instructions contained therein before they use the equipment, and that they should
carefully follow such.
We further recommend that a qualifi ed trainer train you in the use of the product.
WARNING / CAUTION!
The operating instructions for the hoses, the accessories and the connected
hydraulic equipment must also be observed!
Even if you have already received instructions on how to use the equipment, you should still
read the following safety notes through again.
WARNING / CAUTION!
Ensure that the accessories and connected equipment used are suitable for
the max. operating pressure!