Lukas P 630 Lite - Manual (Page 17)

17
ATTENTION!
When connecting the hose assemblies / units, always ensure that the connection
components are not contaminated with dirt. Clean prior to use if necessary!
WARNING/CAUTION!
Before connecting equipment, make sure that all the components
used are suitable for the maximum operating pressure of the
hydraulic unit! In cases of doubt, you must consult LUKAS
directly before connecting the equipment!
6. Connecting the couplings
Mono-coupling
halve (male) Mono-coupling
halve (female)
Dust protection caps
The hose lines / units are connected via quick-disconnect coupling halves (female and male)
to the hydraulic pump or hose reel in such a way that they cannot be reversed.
6.1 Coupling the mono-couplings