Lukas P 630 Lite - Manual (Page 23)

23
The engine must be switched off for refueling!
Procedure:
1. Open the fuel tank cap.
2. Fill the tank with fuel until the
¿ ll level is just below the ¿ lling opening.
3. Close the fuel tank again with the fuel tank cap.
WARNING/CAUTION!
Be sure not to spill fuel. In particular, hot engine parts must not come into
contact with fuel; danger of
¿ re otherwise!
If fuel is spilled, it must be cleaned up immediately with a suitable absorbent
cloth. In doing so, be careful not to burn yourself on one of the hot engine
parts! The used cloth must then be cleaned or disposed of according to the
relevant provisions and guidelines.
8.3 Refuelling
1. Set the ON / OFF switch to the OFF position.
2. When the engine has come to a standstill, close the
fuel tap.
For more details on switching the engine off, please refer to the separate operating
instructions of the engine manufacturer!
CAUTION!
Never touch hot engine parts: this could result in severe burns!
8.2 Stopping the engine
8.4 Controlling the valves
ATTENTION!
The control level of the hydraulic power unit should always be switched to the
neutral position (depressurized) prior to starting the engine in order to prevent
unwanted movements of connected hydraulic equipment.