Synergy 4018-RHD - JK Onboard Air Compressor Bracket RHD (Viair & ARB) User Manual
Page 2
Advertising
3) **NOTE** Be careful not to bump or pull the master cylinder away from the booster during install.
Doing so can dislodge the brake booster o-ring. If the o-ring does become dislodged, do not drive the
Jeep until repaired.
4) Using a 13mm wrench, remove both nuts securing the master cylinder to the brake booster.
5) Install the 4018-RHD bracket using the factory nuts removed in step 4.
Advertising