Synergy 5410 - Jeep JK Front Bumper User Manual
Page 6
Advertising
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
8. Tighten the front stabilizer bar retainer bolt. To 45 ft-lbs.
9. Install the M10 x 100 bolt with a 3/8” washer and sleeve thru the stabilizer bar
tension link into the disconnecting stabilizer bar housing where you removed the
bolt in step 5. Tighten to 20 ft-lbs.
10. Install the winch mounting plate, line the holes up with a few bolts to hold it in
position.
Advertising