Synergy 8023-X - Jeep JK Synergy Stage 3 Suspension System - Manual (Page 17)

• Adjust the draglink to center the steering wheel by using the adjuster sleeve on the
passenger side tie rod end (steering knuckle end). This requires a 1 ¼” wrench.
Tighten the pinch bolt to 50 ft-lbs.
• If the steering wheel is not centered the ESP light will come on, so make sure you
adjust the draglink so the steering wheel is perfectly centered. This is can
accomplished by test driving and making the necessary adjustments. When driving in
a strait line take note of which way the steering wheel needs to turn to be centered. If
the steering wheel needs to turn right to be centered, shorten the draglink. If the
steering wheel needs to turn left to be centered, lengthen the draglink
• We recommend you have the jeep aligned by a professional alignment shop. The
front castor should be set to around 5 degrees.
• Check all hardware after 500 miles of driving.
• We also recommend checking all hardware before and after all off road trips to avoid
failure due to loose fasteners.
Please call you if you have any questions, we can be reached M-F 8-5 pst.