Synergy 8554 - 94-02 Dodge Truck Track-Bar Conversion Bracket User Manual
Page 4
Advertising
Picture 4.2 (TB bracket that will require no grinding modifications)
5) Some grinding will be needed to fit on the PPM-8554 TB Conversion Bracket if tab resembles those
pictured in 4.1a & b.
o Use a 4-1/2” angle grinder with a flap wheel, grinding disk, or sanding disc and clean up weld /
weld area until the underside of the factory TB tab looks as pictured in 5.1 a & 5.1b
Picture 5.1a (Cleaned up factory TB Tab)
Advertising