Belkin Wireless Pre-N Router F5D8230-4 - Manual (Page 21)

19
2
1
3
4
5
6
7
8
9
10
11
se
ct
io
n
Connecting and Configuring your Router
Multi-NICs Screen
This screen will appear ONLY if you have more than one network
adapter installed in your computer. If you have more than one network
adapter installed in your computer,
the Wizard will need to know which
adapter is connected to your modem.
Select the network card that is
connected to your modem from the
list and click “Next”. If you are not
sure which adapter to choose, select
the adapter at the top of the list. If you
mistakenly choose the wrong adapter
now, you will be able to choose a
different one later.
Step 2 Hardware Setup – Connect the Router to your
Modem and computer
The Wizard will walk you through connecting your Router to your
computer and modem. Follow the steps on the screen using the
pictures as a guide.
2.1
This step instructs you to locate
the cable connected between your
modem and the networking port on
your computer. Unplug this cable
from the computer and plug it into
the GREEN port on the Router.
Click “Next” to continue.