Belkin Wireless Pre-N Router F5D8230-4 - Manual (Page 38)

Alternate Setup Method
36
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]. Some ISPs require a connection using
PPTP protocol, a type of connection most common in European
countries. This sets up a direct connection to the ISP’s system. Type in
the information provided by your ISP in the space provided. When you
have finished, click “Apply Changes”
(9)
. After you apply the changes,
the Internet Status indicator will read “Connection OK” if your Router
is set up properly.
1. PPTP Account
Provided by your ISP. Enter your PPTP account name here.
2. PPTP Password
Type in your password and retype it into the “Retype Password”
box to confirm it.
3. Host Name
Provided by your ISP. Enter your host name here.
4. Service IP Address
Provided by your ISP. Enter your service IP address here.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)