Smittybilt 18604 CONTRACTORS RACK - Manual (Page 2)

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220 / www.smittybilt.com
Installation Instructions
CONTRACTORS RACK
PART # 18604
IMPORTANT SAFETY PRECAUTIONS
•
Make sure loads are always evenly distributed and balanced
•
Do not carry or load rack with rear cross bar removed
•
This rack is rated at 800lb capacity (evenly distributed)
•
Randomly check to make sure all hardware is tight and secure.
Component List Hardware List
ITEM # QTY DESCRIPTION ITEM# DESCRIPTION SETS
1 2 Front side rails (Each set includes 1 bolt,2 flat washers,1 lock washer,1 nut)
2 2 Rear side-rails A M10x70 bolt set ( Center cross bar) 2
3 1 Front hoop bar B M12x90 bolt set 2
4 2 Front vertical uprights (P & D) C M12x65 bolt set 8
5 2 Rear vertical uprights (P & D) D M10x70 bolt set 6
6 1 Driver side front mounting plate E M8x45 bolt set ( Center cross bar) 2
7 1 Driver side rear mounting plate F M18x90 bolt set 4
8 1 Passenger side front mount plate G M12x40 bolt set 12
9 1 Passenger side rear mount plate H “J” Hook (with flat washer and nut) 8
10 1 Front Horizontal cross bar I Quick release pin 4
11 1 Adjustable Center cross bar
12 1 Rear Horizontal cross bar
TOOLS REQUIRED
1. Adjustable Wrench
2. Ratchet/Socket Set
3. Tape Measure
4. Rubber Mallet/Hammer