Addictive Desert Designs 2010 - 2014 Ford F150 / Raptor Transmission Cooler - Manual (Page 2)

1. Remove front bumper from truck and put aside.
2. Attach the Two(2) aluminum mount plates to the
frame horns, using the 2 holes per side that line up.
Leave the hardware loose at this point.
1. Bolt aluminum cooler mount between the two
outer aluminum mounts using the provided 6 - 3/8"
button head bolts. Tighten these to 20 - 25 ft/lbs.
at this time.
2. Drill the 4 remaining holes, 2 holes on the
aluminum mount plates on each side, to 1/2".