Snorkel TL34-01-sn000123+ - Manual (Page 26)

20
Emergency Slew / Rotate
EMERGENCY CONTROLS
Fig.14
SLEW MOTOR
BYPASS BALL
VALVE
JACK BOLT
SHOWN WITH PROTECTIVE CAP REMOVED
JACK NUT
1. Turn the slew motor bypass ball valve 90 degrees anticlockwise.
2. Remove the slew motor brake release protective cap using the Hex Key provided.
3. Screw the Jack Bolt and release the Motor Brake by tightening the Jack Nut against the
top of the Slew Motor.
4. Manualy slew the Machine.
5. Remember to remove the Jack Bolt, replace the Protective Cap and return the Ball
Valve w hen finished.
A REPLACEMENT TOOL KIT FOR THIS OPERATION IS AVAILABLE UNDER
PN 510305-000