Snorkel TL34-01-sn000123+ - Manual (Page 27)

21
Emergency Procedures (from the Ground) – Without Power
1. Turn the 2 ball valves fitted under the cabinet 90 degrees ( Fig 16)– photo below shows
normal operating position.
2. Now pull on the red emergency lower knob on the solenoid fitted to the top and botton
boom cylinders. (FIG. 17)
Start with the bottom boom cylinder first to ease access to the top boom
cylinder.
3. The 2 ball valves MUST be returned to the normal operating position (as shown)
before operating the machine. If they are not, you will not be able to elevate the
Emergency Battery Isolating Plug
This plug when disconnected, will isolate the batteries from the power pack and operating
circuits. (FIG. 18)
NOTE: Before operation of the machine, it is important that both the Operator and some other
responsible person on site, is aware of the position and function of the following:
EMERGENCY CONTROLS
FIG. 16
BALL VALVES
FIG. 17
RED EMERGENCY LOWER KNOB
FIG. 18
EMERGENCY BATTERY
DISCONNECT PLUG