Snorkel TL37J-sn7500 - Manual (Page 36)

32
Mains connection
This machine variant requires a power supply from a fixed source.
Prior to operating the machine, follow these simple guidelines;
a) Ensure the power supply being attached is the correct voltage.
b) Ensure the power supply being used is being supplied via an appropriate power
extension.
All extensions must be a minimum of 2.5mm², and no longer than
10m, due to possible voltage drop, which will damage the motor.
1. To connect to a mains supply, simply remove the socket’s protection cap.
2. Connect an appropriately rated power extension.
3. Ensure the voltage output matches the appliance intended for use.
Blue sockets is 240V output. Yellow sockets is 110V output.
4. Ensure that the connection is secure before use.
Appendix 3