Snorkel TM12-sn51941+ - Manual (Page 12)

Transporting the Machine
Page 9 Operation Manual
T RANSPORTING THE M ACHINE
B Y C R A N E
Secure the straps to chassis lifting/tie down points only.
B Y F O R K L I F T
D A N G E R ! !
Forklifting is for transport only.
See specifications for weight of machine and be certain that forklift is of adequate capacity to lift the
machine.
Figure 6: Transporting the Machine
Forklift from the side by lifting under the Chassis.
B Y T R U C K
1. Maneuver the machine into transport position and
chock wheels.
2. Secure the machine to the transport vehicle with
chains or straps of adequate load capacity
attached to the chassis lifting/tie down points.
C A U T I O N
Overtightening of the chains or straps attached to the
Tie Down lugs may result in damage to the machine
H O U R M E T E R
To access the hour meter function perform the following steps.
1. Climb into the basket (with the machine powered up)
2. Push the platform emergency stop button.
3. Hold down the following buttons, Horn and Lift.
4. While holding the buttons twist the emergency stop button to return power to the machine.
5. “hr” will now be displayed on the readout, Pressing the right turn button will scroll through the accumu-
lated hours two digits at a time. For example, if pressing the right turn button once displays “20”, pressing it
a 2nd time displays “58”, and pressing it a 3rd time displays “hr”, the elapsed time of operation is 2058
hours.
Forklift From
Side
Typical Tie Down/Lift Points
(D-Rings)