Snorkel X32-sn53100+ - Manual (Page 8)

Page 4 Operation Manual
504165-002 Special Limitations
S
PECIAL
L
IMITATIONS
Travel with the platform raised is limited to creep speed range.
Elevating the Work Platform is limited to firm, level surfaces only.
D A N G E R ! !
The elevating function shall ONLY be used when the work platform is level and on a firm surface.
The work platform is NOT intended to be driven over uneven, rough, or soft terrain.
P
LATFORM
C
APACITY
The maximum capacity for the MACHINE, including occupants is determined by model and options, and
is listed in “Decals” on page 18.
D A N G E R ! !
DO NOT exceed the maximum platform capacity or the platform occupancy limits for this machine.
M
ANUAL
F
ORCE
Manual force is the force applied by the occupants to objects such as walls or other structures outside the
work platform.
The maximum allowable manual force is limited to 200 N (45 lbs.) of force per occupant, with a maximum
of 400 N (90 lbs.) for two or more occupants.
D A N G E R ! !
DO NOT exceed the maximum amount of manual force for this machine.
B
EAUFORT
S
CALE
Never operate the X32 machine when wind speeds exceed 7m/s [Beaufort scale 4].
L
I F T
O
VERLOAD
A
LARM
If a load equivalent to 90% of safe working load is lifted a fault code “03” will be displayed on the digital
display on the platform control box. If a load which is greater than the safe working load is present in the
basket all machine functions will cease to operate and an acoustic warning will sound. In order to return to
normal operation a load equal to or less than the safe working load must be present in the basket and the
power must be re-cycled, power can be re-cycled by pushing the emergency stop button and releasing it
again.
D A N G E R ! !
Never operate the machine with a platform load greater than the rated capacity.
BEAUFORT
RATING
WIND SPEED
GROUND CONDITIONS
m/s km/h ft/s mph
3 3,4~5,4 12,25~19,4 11.5~17.75 7.5~12.0 Papers and thin branches move, flags wave.
4 5,4~8,0 19,4~28,8 17.75~26.25 12.0~18 Dust is raised, paper whirls up, and small branches sway.
5 8,0~10,8 28,8~38,9 26.25~35.5 18~24.25 Shrubs with leaves start swaying. Wave crests are apparent in ponds or swamps.
6 10,8~13,9 38,9~50,0 35.5~45.5 24.5~31 Tree branches move. Power lines whistle. It is difficult to open an umbrella.
7 13,9~17,2 50,0~61,9 45.5~56.5 31.~38.5 Whole trees sway. It is difficult to walk against the wind.
Never operate the X26 machine when wind speeds exceed 12.5m/s [Beaufort scale 6].