Snorkel XRT27 Electric-sn1000+ - Manual (Page 6)

Page 6 X27 Electric
E MERGENCY L OWERING
Figure 3: Emergency Lowering Valve Knob
The emergency lowering control is located at the
rear of the elevating assembly
1. Open the emergency lowering valve by pulling on
the knob and holding it.
2. Once the platform is fully lowered, release the
knob to close the valve.
A FTER U SE E ACH D AY
1. Ensure that the platform is fully lowered.
2. Park the machine on level ground, preferably
under cover, secure against vandals, children or
unauthorized operation.
3. Turn the key switch to OFF and remove the key to prevent unauthorized operation.
P ARKING B RAKE R ELEASE (F IGURE 5)
Perform the following only when the machine will not operate under its own power and it is neces-
sary to move the machine or when winching onto a trailer to transport.
1. Turn Platform/Chassis/Brake Release switch to Brake Release position. Alarm will sound.
2. Momentarily push brake Release button.
3. The machine will now roll when pushed or pulled.
4. For normal operation, turn Platform/Chassis/Brake Release switch to Platform position.
W A R N I N G ! !
Never release brakes if machine is on a slope. Hook machine to towing
vehicle before releasing brakes.
W A R N I N G ! !
Never operate work platform with the parking brakes released. Serious injury
or damage could result.