Snorkel MHP35 - Manual (Page 60)

Lower control box, 7-6
M
Maintenance personnel
see Introduction - page iii
Minimum Safe Approach Distance
see Electrical Hazard - page ii
N
Nomenclature And Serial Numbers, 3-5
O
Operating Procedures, 8-1
Control Stations, 8-1
Emergency Stopping, 8-1
Moving The Platform, 8-4
Starting From Ground Control Box, 8-2
Starting From Platform Control Box, 8-3
Operation, 8-1
Operators
Qualified, 7-1, 8-2
Other Safety Devices, 2-1
Overall Dimensions MHP13/35, 3-3
P
Placards and decals, 7-7
Inspection drawing, 7-8
Standard placards and decals, 7-7
Platform
Foot switch, 8-5
Lanyard anchor points, 7-5
Pre-start Inspection, 1-1
Q
Qualified operators
see Introduction - page iii
R
RCD/ELCB Outlet (option), 5-1
Responsibilities of owners and users
see Introduction - page iv
Right side view of machine, 3-5
S
Safe Operation, 1-1
Safety Alerts, Caution, Danger, Warning
see Introduction - page iii
Safety Decals and Placards, 1-4
Safety Devices
Bubble level, 2-2
Emergency Stop Switches, 2-1
Flashing light, 2-3
Foot switch, 2-2
Gravity gate, 2-2
Guardrails, 2-2
Lanyard anchor points, 2-1
RCD/ELCB AC outlet, 2-3
Safety Device Information, 2-1
Safety precautions
Fuel Handling Precautions, 1-4
Hydraulic Systems, 1-3
Sandblast protection kit, 8-1
Securing for Day, 8-5
Stowing
Trailering
Forklift points, 10-2
Stowing the MHP13/35, 10-1
Boom lock pins, 10-1
Structural damage and welds, 7-4
Boom welds, 7-5
T
Tipover hazard, 1-3
Towing, 10-2
Bolt, D-Clamp or attaching device, 10-2
Covers and debris, 10-2
Jockey wheel, 10-2
Latching mechanism, 10-2
Rated speed, 10-2
Road lights, 10-2
Tow ball, 10-2
Under rated vehicle, 10-2
Transporting
Trailering
Forklift points, 10-2
Transporting the MHP13/35, 10-1
Securing to a Transport Vehicle, 10-2
Trailering, 10-1
Troubleshooting, 13-1
Operator Troubleshooting Chart, 13-1
W
Warranty - Limited
see inside front cover
Wheels and tyres, 7-4
Wiring harnesses, 7-2
Loose connections, 7-2
Work Place Inspection and Practices, 1-1
index 2 MHP13/35 – 12431A
Index