Snorkel MHP35 - Manual (Page 33)

■ Stabiliser Controls
Stabiliser Controls
1. Boom / Stabiliser Switch: Ensure the
boom/stabiliser switch on the lower control
box is set to stabiliser (see Item 6 on page 2
of this chapter)
NOTE:
En sure that the front sta bi lis ers are low ered first
to pre vent dam age to the jockey wheel.
2. Valve Levers: Operate the valve levers to
activate the stabilisers and level the
machine.
3. Bubble level: Use the bubble level to level
the machine.
■ Self Levelling Stabilisers (Option)
Self levelling Stabiliser Controls
1. Auto Level / Stow Switch: Se lect ei ther
auto level or auto stow, to raise or lower the
sta bi lis ers au to mat i cally.
2. Manual Stabiliser Switches: Operate the
manual switches to manually raise or lower
individual stabilisers.
3. Leg Indicator Lights: Illuminate when the
legs are in contact with the ground.
4. Lift Enable Light: This is a duplicate of the
lift enable light on the lower control box. The
platform can only be raised when this light is
lit. When this light is not lit the platform will
not raise because the stabilisers are not set
properly.
NOTE:
En sure that the front sta bi lis ers are low ered first
to pre vent dam age to the jockey wheel.
Ac ti vate the rear sta bi lis ers and level the ma -
chine us ing the level bub ble ad ja cent to the con -
trol levers.
page 6 - 4 MHP13/35 – 12431A
6. Controls