Document Outline

• Table of Contents
  • Electrical Hazard
    • Electrical Hazard Warning -i
    • Minimum Safe Approach Distance -ii
      • Table 1 - (M.S.A.D.) -ii
      • Figure 1 - (M.S.A.D.) -ii
  • Introduction
    • Safety Alerts -iii
    • Options -iii
    • Operation -iii
    • Maintenance -iv
    • Manual of Responsibilities -iv
    • Additional Information -iv
  • Chapter 1. Specifications
    • Component Identification 1-1
    • Working Envelope—SP20 1-2
    • Working Envelope—SP22 1-3
    • General Specifications—SP20 1-4
    • General Specifications—SP22 1-5
    • Engine Specifications 1-6
    • Engine Oil Viscosity 1-6
    • Hydraulic Hose Age 1-6
  • Chapter 2. Safety
    • Electrocution Hazards 2-1
      • Minimum Safe Approach Distance 2-1
    • Safety Overview 2-1
      • Use of the Aerial Work Platform 2-1
    • Safe Operation 2-2
      • Pre-start Inspection 2-2
      • Work Place Inspection and Practices 2-2
      • Electrocution 2-3
      • Tipover and Falling Hazards 2-3
      • Crushing 2-4
    • Special Limitations 2-4
      • Manual Force 2-4
    • General Safety Precautions 2-4
      • Personnel Precautions 2-4
      • Operator General Precautions 2-4
      • Mounting and Dismounting Precautions 2-4
      • Starting and Stopping Precautions 2-4
      • Operating Precautions 2-4
      • Operator Maintenance Precautions 2-4
      • Electrical System 2-4
      • Hydraulic System 2-4
      • Fuel Handling Precautions 2-5
    • Safety Decals and Placards 2-5
    • Beaufort Scale 2-5
    • Safety Placards and Decals Drawing 1 2-6
    • Safety Placards and Decals Drawing 2 2-7
  • Chapter 3. Safety Devices
    • Emergency Stop Controls 3-1
      • At ground control box 3-1
      • At platform control box 3-1
    • Emergency Power System 3-1
    • Manual Lowering Knob 3-1
    • Platform Foot Switch 3-2
    • Guardrails 3-2
    • Lanyard Anchors 3-2
    • Horn 3-2
    • Tilt Alarm 3-2
    • All Motion Alarm 3-2
    • Flashing Light 3-2
    • Driving Lights 3-2
    • Platform Working Lights 3-3
  • Chapter 4. Gauges and Displays
    • Hour Meter 4-1
    • Engine Air Filter Gauge 4-1
    • Fuel 4-1
    • Engine Oil 4-1
    • Hydraulic Fluid Filter Gauge 4-2
  • Chapter 5. Shut-offs and Circuit Breakers
    • Automatic Shut-offs 5-1
      • Engine temperature (Cummins engine) 5-1
      • Engine temperature (Deutz engine) 5-1
      • Engine oil pressure 5-1
      • Dynamic brakes 5-1
      • Platform height vs. drive speed 5-1
      • Axle lockout 5-1
    • Circuit Breakers 5-1
      • Main circuit breakers 5-1
      • RCD / ELCB 5-1
  • Chapter 6. Controls
    • Chassis Controls 6-1
      • Battery Disconnect Switch 6-1
    • Ground Controls 6-1
      • Master Switch 6-1
      • Emergency Stop 6-1
      • Ground Operation 6-1
      • Emergency Power 6-1
    • Platform Controls 6-2
      • Emergency Stop Button 6-2
      • Component Select Switches 6-2
      • Boom and Platform Joystick 6-2
      • Drive and Steer Joystick 6-2
      • High Range Switch 6-3
      • Horn Button 6-3
      • Emergency Power Switch 6-3
    • AC Generator (Optional) 6-3
    • Platform Foot Switch 6-3
  • Chapter 7. Pre-operational Inspection
    • Operator’s Manual 7-2
    • Engine 7-2
      • Oil Level 7-2
      • Coolant 7-2
      • Fuel Tank 7-3
      • Fuel Line 7-3
      • Air Filter 7-3
    • Electrical System 7-3
      • Battery Fluid Level 7-4
      • Battery Terminals 7-4
      • Cables and Wiring Harness 7-4
    • Hydraulic System 7-4
      • Fluid Level 7-4
      • Fluid Filter 7-4
      • Hoses, Tubes, and Fittings 7-4
    • Tires and Wheels 7-5
      • Foam Filled 7-5
    • Ground Control Station 7-5
      • Operating Controls 7-5
      • Emergency Stop 7-5
      • Emergency Power 7-5
      • Emergency Lowering 7-6
    • Level Sensor 7-6
    • Flashing Lights 7-6
    • Hostile Environment Kit 7-6
    • Structures 7-7
      • Weldments 7-7
      • Slide Pads 7-7
      • Fasteners 7-7
      • Wire Ropes 7-7
    • Platform Control Station 7-7
      • Guardrail System 7-8
      • Lanyard Anchors 7-8
      • Operating Controls 7-8
      • Emergency Stop 7-8
      • Emergency Power 7-8
      • RCD / ELCB Outlet 7-8
    • Air Line 7-9
    • All Motion Alarm 7-9
    • Driving and Work Lights 7-9
    • Platform Control Cover 7-9
    • Placards and Decals 7-10
      • Decal inspection drawing 1 7-11
      • Decal inspection drawing 2 7-12
  • Chapter 8. Operation
    • Preparing for Operation 8-1
    • Ground Controls 8-1
    • Platform Controls 8-2
      • Boom Operation 8-2
      • Driving 8-2
      • Steering 8-3
    • Electrical Power Outlet 8-3
    • Air Line 8-3
  • Chapter 9. Emergency Operation
    • Emergency Power System 9-1
      • Ground Controls 9-1
      • Platform Controls 9-1
    • Emergency Lowering 9-2
    • Towing 9-2
  • Chapter 10. Stowing and Transporting
    • Stowing 10-1
    • Transporting 10-1
      • Driving 10-1
      • Winching 10-2
      • Hoisting 10-3
      • Securing for Transport 10-3
  • Chapter 11. Options
    • Optional Tow Kit 11-5
  • Chapter 12. Fire Fighting & Chemical Control
    • Hazardous Components 12-7
      • Antifreeze (UN 1993) 12-7
      • Battery, Lead/Acid (UN 2794) 12-7
      • Diesel Fuel (NA 1993) 12-7
      • Foam In Tires 12-8
      • Gasoline (UN 1203) 12-8
      • Hydraulic Oil (UN 1270) 12-9
      • Liquefied Petroleum Gas (UN 1075) 12-9
      • Motor Oil (UN 1270) 12-9
  • Chapter 13. Troubleshooting
    • Troubleshooting Chart 13-1
  • Appendix A. Glossary
• Index
  • A
    • American National Standards Institute
      • (ANSI), -iii
  • C
    • Canadian Standards Association
      • (CSA), -iii
  • E
    • Electrical Hazard Warning
      • see Electrical Hazard - page i
  • H
    • Hazardous Components, 12-7
      • Antifreeze (UN 1993), 12-7
      • Battery, Lead/Acid (UN 2794), 12-7
      • Diesel Fuel (NA 1993), 12-7
      • Foam In Tires, 12-8
      • Gasoline (UN 1203), 12-8
      • Hydraulic Oil (UN 1270), 12-9
      • Liquefied Petroleum Gas (UN 1075), 12-9
      • Motor Oil (UN 1270) , 12-9
  • M
    • manual of responsibilities, -iv
    • minimum safe approach distance, 2-1
    • Minimum Safe Approach Distance
      • see Electrical Hazard - page ii
  • O
    • Occupational Safety and Health Administration (OSHA), -iii
  • S
    • safety alerts, -iii
  • W
    • Warranty - Limited
      • see inside front cover