Snorkel SR2770 - Manual (Page 63)

❑
Winching Procedure
1. Locate transport vehicle so that SR 2770 will
not roll forward after being loaded.
2. Fully lower platform and retract extension
deck.
3. Be sure the machine is centered with the
loading ramps and carrier vehicle bed, and
that the steering wheels are straight.
4. Attach the winch at the tie down lugs on the
front (steer) end of the chassis.
5. Disengage parking brakes and open
free-wheeling valve to prevent damage to
hydraulic motors. (Refer to procedures
outlined for pushing in the “Emergency
Operation” chapter 9.
6. Winch machine onto transport vehicle.
7. Close free-wheeling valve and reset parking
brakes.
8. Reset the hydraulic system by reversing
these procedures.
page 10 - 4 SR2770 – 11669A
10. Stowing and Transporting