Snorkel TB50(mfg before 2/1/01) User Manual
Page 6
INTRODUCTION
P/N 0074333
iv
MAINTENANCE
Every person who maintains, inspects, tests, or
repairs these machines, and every person
supervising any of these functions, must be
properly trained.
This Operator’s Manual provides a daily
inspection procedure that will help you keep your
TB 42/420/50 in good operating condition. Do not
perform other maintenance unless you are a
TRAINED mechanic, QUALIFIED to work on the
TB 42/420/50. Call QUALIFIED maintenance
personnel if you find problems or malfunctions.
Information contained in this manual concerns
only current TB 42/420/50’s, and the right is
reserved to make changes at any time without
obligation.
RESPONSIBILITIES OF PARTIES
It is imperative that all owners and users of the
TB 42/420/50 read, understand, and conform to
all applicable regulations. Ultimate compliance
to OSHA regulations is the responsibility of the
employer using the equipment.
ANSI Standard A92.5 identifies requirements of
all parties who might be involved with Boom-
Supported Elevating Work Platforms.
A reprint of the “Manual of Responsibilities for
Dealers, Owners, Users, Operators, Lessors
and Lessees of ANSI/SIA A92.5-1992 Boom-
Supported Elevating Work Platforms” is
available from Snorkel dealers or from the
factory upon request.
Copies are also available from:
Scaffold Industry Association
20335 Ventura Blvd. Suite 310
Woodland Hills, CA 91364-2471 USA
ADDITIONAL INFORMATION
For additional information contact your local
dealer or Snorkel at:
Snorkel International, Inc.
P.O. Box 1160
St. Joseph, MO 64502-1160 USA
816-364-0317
http://www.snorkelusa.com