Fault displays – Bosch WFR 3230 User Manual
Page 60

60
Text in display field
Possible cause
Action
Water tap closed?"
Water tap not turned on.
Turn on water tap.
Programme continues.
Supply hose kinked or trapped.
Eliminate the cause.
Strainer in supply hose clogged.
Clean the filter; see Page 54.
Water pressure too low.
Eliminate the cause.
Pump blocked?"
Loose debris is blocking the pump.
Clean the pump (refer to Page 52).
p
The water drainage pipe and/or
drain hose is blocked.
Clean the water drainage pipe
and/or drain hose.
Door open?"
Loading door not closed properly.
Check whether laundry is trapped in
door.
Close the loading door.
AquaĆStop activated"
Water in the base pan. Appliance
leaking.
Call Customer Service.
If the fault cannot be rectified with the aid of the
above table: switch off the appliance, wait
5 seconds, then switch on the appliance, select
and start the programme.
If the fault recurs, call customer service; see Page 62.
Fault displays