Alternate setup method – Belkin PM01110 User Manual
Page 28
26
G Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRnaTe seTUP MeTHod
Note: Your Router may have ports in different locations than depicted in the illustration above�
1�6 Before plugging the power
cord into the Router, plug
the cord into the wall,
then plug the cord into the
Router’s power jack�
LAN
WAN
1.4
1.6b
1.5
1.1
1.6 a
1.2
1.3
1�8 Verify that your computer
is connected properly to
the Router by checking
the lights labeled “1–4”�
The light that corresponds
to the numbered port
connected to your computer
should be ON if your
computer is connected
properly� If it is not, recheck
your connections�
1�7 Verify that your modem is
connected to the Router
by checking the lights on
the front of the Router� The
green light labeled “Modem”
should be ON if your modem
is connected correctly to the
Router� If it is not, recheck
your connections�