Alternate setup method – Belkin PM01110 User Manual
Page 41
39
G Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRnaTe seTUP MeTHod
setting your Connection Type if you are a Telstra
®
bigPond User
[Australia and New Zealand Only]� Use this connection type for BigPond Cable and OptusNet Cable connections only�
Clicking “Apply Changes” will reboot the Router� Once the Router has
rebooted, you will need to do the following:
1)
Unplug the power cable from both the cable modem and the
Belkin Router�
2)
Reconnect the power cable to the cable modem, and wait until all
the lights on the modem have stopped flashing�
3)
Reconnect the power cable to the Belkin Router�
To confirm you are successfully connected to the Internet, open an
Internet browser, such as Internet Explorer
®
, Firefox
®
, or Safari
®
, and
ensure that you can browse web pages�