IKA ROCKER 2D digital User Manual

Page 15

Advertising
background image

15

Adjusting the inclination angle of the shaking table

The inclination angle of the shaking table can be adjusted in steps of 2.5° from 2.5 - 15°.

Caution! Do not remove the cover (2) whilst the device is in operation!

Stop the device by pressing the "Start/Stop" button (F). Do not use your hand to stop the device.

Press the "Power" button (L) to switch the device off.

- Undo the screws (1) to remove the cover (2) at the rear of the device.

- Slacken the screw (3) and select the desired inclination angle (4). Tighten the screw (3) fi nger tight.

- Refi t the cover (2) and secure it with the screws (1).

3

4

Use of accessories

2

1

Operating modes A and B
Operating mode A

The device does not restart automatically when power is restored after a power outage.

Operating mode B

The device restarts automatically when power is restored after a power outage, using the set values, and displays the (Pr) symbol to
indicate that there has been a power outage within a certain period of time.

Switching between operating modes

To switch between operating modes, switch the device off, then keep the "Start/Stop" button (F) depressed and press the "Power"

button (L).

Advertising
This manual is related to the following products: