Correct use, Useful information, Commissioning – IKA ROLLER 10 digital User Manual

Page 12

Advertising
background image

12

Correct use

Individual rollers can be removed to allow tubes of different sizes
to be processed. In this case the rollers automatically take up
symmetrical positions on the shaking table, so that the rollers
can be removed and inserted as desired.

Useful information

The integral tube stopper prevents the tubes falling out.
For the safety of the operator, the device switches off automati-
cally if the rollers jam and/or can no longer rotate freely.

Commissioning

IKA

®

Roller 6/10 basic

The AC adapter is suitable for 100 V upto 240 V. Insert an appropriate
adapter corresponding to the country, before plugging the AC adapter
into the mains socket.

Switching the device on
Press the "Power" button (L) to switch the device on.

The LED (M) lights up green.

Starting the device

Press the "Start/Stop" button (F) to start the shaking process.

The device starts at the preset speed of 30 rpm.

Stopping the device

Press the "Start/Stop" button (F) to stop the shaking process.

Switching off the device
Press the "Power" button (L) to switch the device off.

The LED (M) goes out.

• Range of use

- Laboratories

- Schools

- Pharmacies

- Universities

The unit is suitable for use in all areas apart from domestic areas
and areas directly connected to a low-voltage supply which also
serves domestic areas.

The safety of the user cannot be guaranteed if the appliance is
operated with accessories that are not supplied or recommended
by the manufacturer or if the appliance is operated improperly
contrary to the manufacturer’s specifi cations or if the appliance
or the printed circuit board are modifi ed by third parties.

Use

For mixing and agitating liquids.

IKA

®

Roller 6/10 basic

- Continuous mode for single or multiple test tubes.

IKA

®

Roller 6/10 digital

- Continuous mode for single or multiple test tubes.
- Continuous mode for single or multiple test tubes.

• Check that the power supply matches the data on the rating

plate.

• Plug the AC adapter into a standard mains socket in order to

supply the device with power. See the section "Technical data"
for the connection values.

• Also pay attention to the ambient conditions listed in the

“Technical data”.

• The IKA

®

Roller 6/10 basic does not restart automatically

when power is restored after a power outage. If the IKA

®

Roller 6/10 digital is running in mode A it does not restart

automatically when power is restored after a power outage.

If these conditions are met the unit is
ready for service when the mains plug
has been plugged in.

Advertising
This manual is related to the following products: