IKA mini G - Manual (Page 14)

14
• Only process media that will not react dange-
rously to the extra energy produced through
processing. This also applies to any extra ener-
gy produced in other ways, e.g. through light
irradiation.
• Process pathogenic materials only in closed
vessels under a suitable extractor hood. Please
contact IKA
® if you have any questions.
• Do not operate the appliance in explosive at-
mospheres, with hazardous substances or un-
der water.
• Do not process materials that are radioactive,
flammable or explosive, or materials that re-
act chemically with each other releasing large
amounts of energy.
• Safe operation is only guaranteed with the ac-
cessories described in the ”Accessories” chapter.
• Always disconnect the plug before fitting ac-
cessories.
• The appliance can only be disconnected from
the mains supply by pulling out the mains plug
or the connector plug.
• The socket for the mains cord must be easily
accessible.
• The appliance does not start up again automa-
tically following a cut in the power supply.
For protection of the equipment
• The appliance may only be opened by experts.
• The voltage stated on the type plate must cor-
respond to the mains voltage.
• Removable parts must be refitted to the appli-
ance to prevent the infiltration of foreign ob-
jects, liquids etc..
• The device must only be operated with the ori-
ginal plug-in power supply unit.
Unpacking
• Unpacking
- Please unpack the device carefully
- In the case of any damage a fact report must be set immediately (post, rail or forwarder)
• Delivery scope
Centrifuge IKA ® mini G
- Centrifuge IKA ® mini G
- Power supply with exchangeable adapter see Fig. 2
- Rotor for 8 x 1.5/2 ml vessels see Fig. 3
- Rotor for 4 x 8 x 0.2 ml PCR strips see Fig. 4
- 8 adapters for 0.5 ml vessels see Fig. 5
- Adapter set for 0.2 ml vessels (8 pieces) see Fig. 6
- Adapter set for 0.4 ml vessels (8 pieces) see Fig. 7
- Operating instruction
Fig. 2
Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7