IKA Topolino - Manual (Page 8)

8
• Unpacking
- Please unpack the device carefully
- In the case of any damage a detailed report must be set
immediately (post, rail or forwarder).
• Contents of package
- Magnetic stirrer - Operating instructions
• Starting up
- Set the knob to the left stop (you will hear and feel it
clicking into place).
- Place a magnetic rod in a vessel which is penetrable
for magnetic field lines and fill the vessel with the
medium to be processed.
- Place the vessel on the centre of the heating plate.
- Connect the appliance to a socket (the voltage stated
on the nameplate must correspond to the mains
voltage).
- Set the speed using the knob
(Turn to right to increase speed; turn to left to reduce
speed).
• Shutting down
- Set the knob to the left stop (you will hear and feel it
clicking into place), the motor is switched off.
- Disconnect appliance from mains when not in use
C Co orrrre ec ctt u us se e
U Un np pa ac ck kiin ng g
O Op pe erra attiin ng g
• Safe operation is only guarnateed with the accessories
described in the “Technical data” chapter.
• The centre of gravity of the assembly must lie within the
the surface on which it is set up.
• The device will automatically restart following any inter-
ruption to the power supply.
• The appliance may heat up when in use.
• The voltage stated on the type plate must correspond to
the mains voltage.
• Protect the appliance and accessories from bumps and
impacts.
• The appliance and the power supply unit are mainten-
ance-free and must not be opened.
• • U Us se e
- for mixing liquids
• • R Ra an ng ge e o off u us se e
- Laboratories - Schools - Pharmacies